Where has all the Yellow gone?

Notice anything about this palette of thread colours? There's no orange and very little yellow. Day lilies, which is what I'm thinking my recently failed snowflake most resembles, are yellow and orange and ochre and bronze and all of those shades of yellow and orange that I don't buy. They aren't colours that I like, so when I go to buy thread I grab the red/pink/purple/blue shades and come home to tat flowers. That's when I realize that I need green for leaves. I'm getting better at remembering to buy leaf colours, but that yellow in the middle of the flower I keep forgetting. I bought a ball of yellow thread once several years ago and it's almost gone. What looks like a creamy yellow in the picture is really just an off white ball of thread. The left over yellow I have is not an especially appealing shade of yellow, but it's what was available at the time.

I knew I was getting low on some thread colours, so I've recently put in an order for more thread.

Guess what? I ordered blue and navy, red and pink, purple and mauve, green and.......not a yellow or an orange to be seen.

I tend to buy thread for the project I'm working on at the moment and use it up. So if I'm in a store that sells thread, which isn't that often, and I don't have a particular project in mind, I can't think of what to buy. Recently I was in a sewing machine repair shop and found some Sulky thread that I have heard tatters talk about so I bought some. I'll bet you can't guess what colours I came away with.

Pink and purple with matching variegated shades. It looks like the flower will be on hold for the foreseeable future.

It's Alive!

Well it looks like the primrose just needed a little more water because today it's bright and perky again.

The furnace hasn't quit on us today and we've finally had a call from the installation company. They are coming tomorrow to replace the thermostat and check the wiring and after that, we'll see what happens.

No tatting. I'm put off and don't plan on picking up the shuttles again until I feel more inspired.

Utterly random

That's how I feel today. It started with a sock. Why is it that you carefully pair up socks before you start the laundry, but somehow you ALWAYS end up with one odd sock?

The blue primrose is a little flower I treated myself to because they were on sale and when I walked by the stand of them they smelled divine. The sad thing next to it was the red one I bought Friday. A lovely little plant just ready to burst into blossom and chock full of buds to come. That was before we'd had another furnace failure. I'm not blaming its demise on our erratic indoor temperatures, although I doubt that the constant change has helped much. It's not totally dead, but it may not revive enough to bloom.

This is how it looked when I brought it home - I even remembered to take a picture of it.

A lovely little primrose just ready to burst into blossom and chock full of buds to come. That was Friday before we'd had another furnace failure. I'm not blaming it on our erratic indoor temperatures, although I doubt that the constant change has helped much. It might have been in shock coming from the 9F temp outside into the sometimes 73F inside. It might have been dried out from sitting on a rack in the store. I might have over watered it to compensate. So I bought another one just in case. That's my story and I'm sticking to it.

And the tatting.....If I was designing a trumpet shaped 3D flower this would be an awesome design. Since what I'm actually designing is another snowflake, it's an abysmal failure. I'm having far too many of those lately. Out of the projected 30 designs I have 20 done and 12 drawn so I'm not much further ahead even though I have been tatting steadily.

I thought about knitting socks but knitting seems too tedious to me. I know what you're going to say. How can anyone who tats call knitting tedious. It is to me. I suppose it's because I don't enjoy it. I can tat, crochet or embroider for hours, but knitting just doesn't do it for me. Then there's the whole knitting in a circle thing needed for socks that I have never mastered. The other day I saw a reference to a circular knitting machine and thought that's just what I need. A machine to speed up the process so that I could endure the tedium. A quick search of the internet and that idea fizzled quickly $1750.00 delivered. No way baby! That much dough will buy me a lot of tatting thread.

I love tatting, but it's totally impractical. you can't make socks or shirts or blankets out of tatting like you can with knitting or crochet. Tatting is beautiful, elegant, timeless and lovely. But it's definitely not practical.

See what I mean, utterly random. Maybe if I get my brain back in gear, I'll have better success designing. Or maybe not.

They didn't tell us

We were told when we got this new furnace that we would have considerable savings on our heating costs. They didn't tell us it would be a result of the furnace periodically quitting and allowing the house to drop down to Arctic temperatures. I think there ought to be a list of simple restarting instructions and an alarm that goes off when the heat drops below it's normal setting. Don't you agree? In case you haven't guessed, yes the furnace did quit again last night.


What I really want to blog about is this:
It may not seem like much to you, but when I moved out on my own I bought a lot of things to set up housekeeping for the first time. One of the things I bought was a basic set of flatware with service for 8, just because I liked having friends over for dinner and wanted enough utensils so that no one had to eat with their fingers unless they wanted to. After 25 years of use the knifes started developing pits along the blades, the tips of some of them were bent as a result of being used as screwdrivers, (I'm not mentioning names) and some of the tines of the forks don't line up (again not mentioning names) and many of the spoons have their handles bent in a n S shape (I have no idea what they got used for). So it was time to get a new set.


Now I THOUGHT that this was a simple matter of just selecting a pretty design, but apparently not. Anything with an embossed design was rejected as being conducive to pitting. Satin finishes were likewise summarily dismissed. Patterns with angular or sharp edges were cast off as being too hard to cut with, (I thought food was cut with a knife, but apparently not).


Armed with this list of criteria I ended up with this:


Plain, simple, unadorned, but don't drop it on a plate, these suckers are heavy....and don't fit in my cutlery tray. The other half has bee joking that the knives are as heavy as his hammer. (NO you can't use these as substitute tools!) So now I need a new one of those. But at least I now have a serving set that matches my flatware and I'm no longer worrying about what might be leaching out of the metal with every mouthful we eat. The pattern, if anyone is interested, is Oneida's Lincoln.

Not AGAIN!!!!!

After our little heating episode Thursday morning, which was resolved by turning it off for ten minutes and then re-starting it, it ran all day. About 10: 00 PM I noticed that it was getting a bit chilly. If the weather outside gets cold it can feel cooler in the house so I checked the indoor/outdoor thermometer on the wall. The top is outdoor and that isn't 94, it's 9.4 F which is bloomin' cold. See the lower number? That's our indoor temperature of 71.7 which isn't too bad....
Except that the thermostat is actually set for 74 and it shows an indoor temp of 72. You know what that means? It means that late at night on the coldest night of the year so far, our lovely new furnace has quit again.

OK, so we know what to do. Cut power to the furnace for 10 minutes and then start it again and we have heat once more. Or at least we have heat for an hour when it shuts off again. So we make another call to let the furnace company know that their lovely piece of crap has quit again.

Of course since this is, the coldest night of the year, they are being inundated with emergency calls and people with furnaces that won't come on at all, especially those with small children, elderly or infirm family members take priority, and that's as it should be. Unfortunately, that means that we are at the bottom of the list and no one is going to run right over and fix our problem but the technician does stay online with hubby long enough to walk him through a check of some of the more critical issues.

First thing is to check for flashing lights in the sight window. Lights? Sight window? Do you see a window?

There is a tiny window but all that you can see through it is the pilot flame and while it flickers like a flame, it certainly doesn't flash.

So my honey tells the guy that there's no flashing light at all.

Then he gets down on the floor in the tiny foot wide space in front of the furnace to undo the front of the furnace and look inside. Guess what? See that big yellow sticker? Know what's hidden underneath it? The sight window. Inside, the red light is giving 2 flashes. Know what that means? No? Neither did I until I read the troubleshooting guide. It means there is something faulty in the furnace. NO! Really? I never would have guessed it.

Our helpful techie guy goes through re-wiring the furnace to by-pass the thermostat and the furnace runs non-stop until we turn it off. At 1:00 AM Friday morning his instructions were to leave it running until it gets too hot, then turn it off until it gets too cold.

Gee thanks. Doesn't seem like a good idea to me, does it to you? You can either fall asleep with the furnace running and burn the house down, or fall asleep with it off and wake up to frozen water pipes. OR as another alternative, set your alarm clock to go off every hour all night long turning the furnace on and off, OR, my personal favourite, just stay up all night.

We ran the furnace until the house got too hot and then shut it off. After about half an hour it started getting chilly again and hubby could see that shutting the furnace on and off wasn't going to be an option if we wanted to get any sleep. Fortunately, he had taken pictures of the wiring before any of this happened so he wired it all up properly again and thankfully it ran all night.

This morning the technician called to see how things were going and when he found out that hubby had already re-wired it, he said they'd look at it when they had a little more time. (translation, never, unless we call to complain again).

Since I thought I might be sitting up all night turning the furnace on and off, I took the opportunity to test out some of the ebay thread. Several people suggested that the thread may not be usable due to it's age and the possibility that it had been improperly stored, so since the thread at the top of the pile was green, I thought I'd tat a shamrock or two. The extra kink in the thread caused by the little dip in the dimpled ring is sure to cause it to break if the thread is weak. It looks like it's OK, or at least this batch is. I expect that it will all be usable. I don't have to retro tat that much and when I switch from size 20 to size 80 or sewing thread, I normally relax my tension a lot.

This ball, like most of it in this batch is vintage Coats and Clark size 70.

64F or 17.7C

Whichever way you write it your nose is sure to be cold. Mine was when I woke up this morning. See this?

The thermostat was set for 73 and hubby turned it up a notch when we got up this morning to see if the NEW furnace would come on. It didn't. We have had this furnace exactly 8 days and it quit on us. It may be set for 73, but as you can see it's actually 64. The thermometer upstairs says it's balmy 60 degrees. Man is it cold in here!

There were a whole laundry list of issues about the new furnace The old one was 50,000 BTU and the new one we ordered was 40,000 BTU which should have cut down on the cost of running it. They had trouble getting the 40,000 BTU unit on time so they substituted a 60,000 BTU furnace of the same dimensions. It's a townhouse and there isn't a lot of space between the wall and the cold air return so they needed a diminutive model. OK so it kicks out more heat, but all of the other energy saving specs are the same.

The new furnaces don't use a chimney flue they need a 2 inch wide pipe to suck in fresh air from outside and a second pipe to vent the furnace exhaust. Since our basement is, as yet, unfinished they wanted to run these pipes from the furnace at one end of the basement diagonally up to ground level at the other end of the basement. That, coincidentally, would have obstructed access to the sink/washing machine/dryer. AND the horizontal piping results in not just moisture from the air, but actual rain water and snow from outside to come in and travel down the angled pipe into the furnace. The solution is ANOTHER small half inch pipe laid across the floor and down into the floor drain. I swear these guys are trying to strangle me with the overhead pipes and trip me with the floor pipe.

Amongst the list of things not done or not done right.
They weren't sure they would have enough pipe and at some of the joins one pipe is inserted well into the connecting pipe, but at other joins they barely touch.
They drilled the holes for the pipes and left the cut out cores, dust and dirt all over the patio.
They left finger sized holes around the furnace where it connects to the duct work.
They forget to bring duct tape, so we had to run out and get proper sealing duct tape and finish the job. It took nearly an entire roll of tape to seal everything off properly.
They didn't bring a programmable thermostat which was supposed to come with the unit, but they had a thermostat in the truck that they installed only after we reminded them.
As they were about to leave we asked if they had reconnected the air conditioner - they hadn't and had to come back and wire in the air conditioning.
A couple of days after they left it occurred to us to try the fan by itself. Guess what? no fan.

With all of the things missed I suppose we shouldn't be that surprised that we woke up this morning to a frigid house. After a quick call we have been able to restart the furnace and the temperature is slowly rising, but I want to know why it quit in the first place.

Ebay

In November, for the first time ever I bought something on eBay. I saw a picture. I typed in some numbers. I waited patiently for bidding to close. I typed in some more stuff to pay, and a few days later this arrived in my mailbox.

I was so excited about it, I did it again, and a few days later, this arrived, minus the heavy tin which I didn't want anyway.

I was psyched. Boxes full of size 80 thread in colours I had only dreamed of using, were arriving in my mailbox. My brain went into overload. Then my frugal side kicked in and I went looking for the Canadian version so that I might pay less for shipping.

I won this lot which has fewer balls of thread in it. I asked what the cost of shipping would be and was given a ridiculous number which I queried. I'm Canadian, I know what it ought to cost. I was told that the number was an estimate but if it was less they would refund the excess.

This lot which had the fewest number of balls of thread cost me as much as the 2 prior lots combined. Not more than I was willing to pay, just enough more that it wasn't a good deal any more, just a normal price. Most of this had to do with a padded shipping price. I don't really mind someone padding the shipping in order to get what they feel is a fair price for their merchandise. What I do mind was that when I initially questioned their shipping costs of $12.00 I was told that they would refund the difference if shipping was less than quoted and they didn't do it. I don't care about the $4.00 excess. I do care that they lied.

I would rather have someone say it's going to cost and arm and a leg. Period. Full Stop. Than have someone wheedle their way out of it by saying they will refund something and then not do it. If they don't intend on adjusting the cost, they should just shut up about it.

I'm not going to cry over $4.00. I have my thread and I'm happy about it. I don't want eBay to launch an investigation or make an inquiry. It isn't important. What really did annoy me was that I was requested to give feedback and with the first 2 I was delighted to respond. On the 3rd purchase I could not say that it had been a delightful experience. It was what I had bid on exactly as described. It arrived all in one piece although it took longer to get here from a city down the road than it did for the other parcels to arrive from halfway across the continent. I could not honestly say that it was a great transaction. It was OK. It was neutral. It was neither good nor bad. So I tried to give a neutral response. The system did not permit a neutral response. I don't mean that it wouldn't take a BAD response. I wasn't trying to say anything bad. I just wanted to say something neutral because I sure as anything wasn't going to give a GOOD response.

Since you can't give anything EXCEPT positive responses, eBay's whole system of feedback is really, totally suspect. As a buyer, I don't really care about the good transactions (I do care, but not as much as I care about the bad ones) because I'm going to assume they were all good except as outlined in the feedback. Then, reading through the feedback, I can judge for myself if I want to take the chance and deal with that particular vendor.

I know that as a business eBay wants to present it's activities in a positive light and that the more positive things are the better an enterprise it appears to be. I just think that not allowing a neutral response forces people to give a negative response in order to just make a comment OR to just always give a positive response. Since I couldn't say what I really wanted to say, I just deleted the request for feedback. That was as close as I could come to a neutral response.

I know eBay doesn't care about my opinion, but I wonder how many other folks came across the same issue.

Fits

That's what this snowflake is giving me. I tatted it the first time with cluny leaves and while it was OK, the clunies didn't give it anything special. They're a lot of work, they take time and they ought to add to the design, which they didn't. So I replaced the clunies with split rings and re tatted the whole thing. There was a little overlap which I assumed would come out when it was blocked. Well here's the little stinker on the blocking board drying and it still needs work. It was only when blocking that I realized that I should not only have replaced the clunies with split rings, I should have also joined them. And shortened one if the chains, and maybe modified the points....

What's the use, maybe I should just scrap it. I already ditched a previous design because drawing it was a pain in the butt. I like that this one has nice sharp points and still holds it's shape. If it wasn't for that I'd totally give up on it.

Out with the Old in with the New

Our 33 year old furnace has been limping along that last few years with a lot of coaxing. It heats well enough but it has broken down a number of times. A couple of weeks ago I was up tatting after hubby had gone to bed and I heard a loud clunk. I realized after a while that I hadn't heard the furnace come on for quite a long time so I woke him up to check it out. Whatever it is that fell off he was able to put back on and the furnace started up again. The one thing you don't want in a cold Canadian winter is a furnace that stops working in the middle of the night. Good bye old friend.

Yesterday they installed a new energy efficient furnace which is supposed to save us money on our heating bill. Seeing as the government is allowing rebates on these things we had an energy audit done and we were left with a number of things that we can do to qualify for the rebates. It turns out that we can get back about 50% of the cost of the furnace. Of course the cost of the energy audit will eat up about half of that amount, but still, it is a considerable savings. Hello handsome. I hope you'll be able to keep me as cozy and warm as your predecessor did.

The old unit had a quarter horse power motor, this unit has a half. It may use gas more efficiently but gas is only half of the expense. The other half is the cost of running the blower motor and with a motor that is twice the size you anticipate twice the cost in running it. I guess we'll see.

Lest you think I haven't been tatting at all, what with all this uninteresting stuff going on, here's the latest bits to fall off the shuttle Snowflake 21 is in process and will have to be re tatted because I don't like the centre. I ought to stop now because if the centre changes in size, it's going to change the rest of it, but I have 2 full CTM shuttles and this will be the third time in a row that I've thrown away 2 almost full shuttles of thread.

As a designer I frequently cut work off and re-join thread in. That's why there is a tutorial for adding in thread on the side bar. I do it. a lot. I'm good at it. I have to be. Working on a series of snowflakes I have found myself using designs where adding in thread is most inconvenient. You may have seen in some of the recent pictures, lots of thread ends. I have finished one snowflake and then just started another with whatever amount of thread there is on the shuttle at the time.

The last few designs I have needed a full row's worth of CTM thread. When I've needed to start again it has meant pulling the thread off the shuttle, or in my case popping out the bobbin with the half done bits and popping in 2 new CTM bobbins. Since these are new designs and I don't know where I'm going with them or how they might change along the way, I want full bobbins before I start. I've run out of empty bobbins. I don't like leaving half done designs on the bobbins. I'd rather cut the thread off and start again. I have a dozen little skeins of thread I've already pulled off the shuttles and it's really starting to bug me. I think all of this duct pulling/ energy audit/furnace installation stuff is really messing with my creativity. I'm finding the only time where I can sit and work undisturbed is in the middle of the night. Literally. I'm not at my best creativity wise in the middle of the night and that's bugging me too.

Here's hoping I can get my brain in gear and get some serious designing done instead of half full shuttles and twisted little skeins of unfulfilled dreams.

Nineteen

Only 11 more designs to go. Twelve of the nineteen are blocked and drawn. Four more are blocked but not drawn. Two more are sitting by my tatting seat. This one looks pretty, but has a few stinking long split chains, one of which needed to be tatted in reverse order. I may need to re-think it, as the only way to tat it in one go, it needs a joining ring in the middle of a split chain.

My designing lately has taken a back seat to demolition and other "fun" stuff. Our furnace is over 30 years old and you can no longer get parts for it. To take advantage of government rebates, we've decided now is a good time to get the job done. We called several companies and had them come out and take dimensions, arranged for the energy audit and then started removing some extraneous duct work in preparation.

This mess piled up beside the bike is the remains of some duct work originally installed to pump heat into the garage to keep it toasty warm in the winter so that the shop could be used. Unfortunately a minor repair 30 years ago resulted in the furnace being red tagged and the gas was shut off. We couldn't get it turned back on until the opening into the garage was sealed. Once it was sealed off, it served no purpose, but it did connect to the duct work that they are about to start working on to install the new furnace. We had to remove duct work that was about a foot across, accessed from an opening that was 7 inches wide. Do you see a problem with those numbers?

Part of this was done by working overhead in the basement and part of it from the 7 inch wide opening in the garage wall. Much of it was cut out in sections using metal cutters. Boy, does that hurt the thumbs after a while. We took turns working at it and finally resorted to using a cut off blade. We wore out 2 cut off blades and hubby got gashed on sharp metal bits, but it's finally out and the openings in the basement and in the garage have been sealed back up. AFTER, we got most of it out, we realized that 30 years ago a section of the garage wall had been removed to give access so that the whole Z shaped thing could be inserted into the wall in one piece. Which explained how things were screwed together from both sides when they couldn't be reached from either the basement or the garage.

I am SO looking forward to getting this installation completed so we can get back to normal.

I'm on a roll.....

....downhill. I began this one and realized at this point that if I continued it would end up being doily size and not just a snowflake so I cut it off and started again.

I tried something along the same lines adjusting for the mistakes in the previous version. I wanted a centre of cluny leaves which I thought would look good but it turned out to be just a mess.

I've had 3 designs in a roll that have been total duds. It's enough to make me want to quit designing. I expect it's just that I've been pushing too hard instead of letting it flow. I think I need to change my perspective and maybe change the kinds of things I'm working on.

BLECH!!

I used nail clippers to snip the shuttles off the last snowflake while I was sitting in the waiting room and knowing that I was going to be waiting a little longer I started right in on a new design, and just started making a ring without thinking or planning much. I hid the thread ends as I worked the first ring and chain and just carried on.

After I did the first ring neatly hiding ends, I realized I had only put 3 picots on it so I thought I'd do the next snowflake vertical. What I mean by that, is working the design from centre to outer rim and back to centre, for each of the 6 sides of the snowflake. I threw in a cloverleaf to broaden out the section of the snowflake and then had no inspiration of where to go from there so I lamely attached the chain to the side of the ring and slapped on a large ring at the point. Coming down the second side of the point, the chain had nothing to join into yet and the join was on the wrong side of the chain.

You can do it by slipping a spacer in at the appropriate point so that you can join into it later but it's what I call an "ugly" design. Not ugly in final appearance, but ugly in the way it needs to be worked.

After a couple of repeats I ran out of thread and couldn't whip up enough enthusiasm for the design to add in the thread to finish it. It's disgusting and I'm not going to finish it.

What else? A Snowflake

Started last night, finished this morning sitting in the waiting room while hubby got his hearing aid adjusted.

Best intentions and all that jazz

I thought that this year, since I have kind of cleared the deck and I don't have anything pressing that needs doing, that I might make the attempt to blog every couple of days. For the last little bit I've been blogging about the snowflakes Ive been designing and it's given me a reason to post stuff every few days. It hasn't been all that hard really, since there is lots of bloggy, tatty stuff to talk about. I was wondering why I hadn't been blogging all along and then it hit me.

The reason that there is a clear deck is that the Marvellous Motifs book is done, the Design-Tat group is finished and the senior's tatting class is in hiatus till January 12, 2010.

The new book of snowflakes is about quarter done. 15 designs completed with 9 already drawn. I have plans for a book of 30 designs, so there is one for each day of the month. There will be a new Design-Tat group in the spring and I need a dozen -easy for first time tatters- patterns to create for the senior's group. Then there is the hour or so every day to keep up with the 25 Motif Challenge blog and whatever time out of my schedule hubby needs for me to help out with whatever project he has going on.

I guess that explains why I don't blog regularly. All this "free time" is just the lull between the busy-ness of living. Just in case you're wondering, here's most of the snowflakes so far. I did a few with the rhinestone centres but I'm re-doing them without as well (nothing like doubling up the work).

That should just about keep me hopping until it's time to do the massive bookkeeping job that is doing taxes for running 2 businesses..........I think I need a big bottle of time.

Flower Power

My one living room window faces north and the blinds are almost always closed because that same window faces the 3 story townhouses behind us and offers them a front row seat at whatever it is that we're doing. Consequently the house plants don't get enough light to survive let alone flower. I used to have over 100 plants on my south facing windowsill until the parrot got to them, but that's another story. The violets I buy in flower, never bloom again, the Amaryllis I bought last year flowered gloriously and grew a crown of leaves which died off, one after the other this fall leaving me with a stump. I'm hopeful that it has gone dormant and will surprise me soon with another big showy flower. As for the rest of the plants they are mostly just green leaves that look like overgrown grass.

Some time ago my sister gave me a potted cutting from a Schlumbergera more commonly know as a Christmas cactus. It wasn't anything remarkable, just a few leaves stuck into a pot and I put it on the table by the patio doors and hoped for the best. I had reason to open the curtains the other day and noticed a bud on the tip of one leaf. I had no idea what colour the flowers would be and the bud appeared mostly white. White's OK but in a dreary Canadian winter I long for vibrant reds, that splash of "in your face" colour that says 'Hey! Look at me, I'm alive!"

So want to see what it is? It's as close as a cactus gets to red.

Of course you know that in a house where there is exactly ONE flowering plant, you really want to be careful with it, especially while it's blooming. Just as a precaution, I mentioned this to hubby to make sure the delicate flowers didn't get bruised with the curtains being opened and closed as we take out the trash. Of course you know it was inevitable. It's the one plant doomed to get knocked over and turned upside down on it's head. I picked it up and put it back in the pot and pulled it out from behind the curtains to keep it from getting frozen as we go in and out and as an extra safety measure, put it on the dining room table so that I can enjoy it's colour for as long as it blooms. Of course since I moved it to the dining room table, the table has become a necessary work bench and it's been leaned on, knocked over again and had all manner of bits and pieces of things laid on top of it.

If it survives, I'll take a cutting to plant on the opposite side of the pot to balance it out. The weight of all of the leaves hanging to one side is what caused it to topple in the first place. Just to prove that it did live long enough to flower I at least have a picture of it, and while I was at it, I made an attempt to use the macro setting on the camera.
Crappy lighting and my crappy photography skills are to blame for this less than stellar picture. I'm sure it's not the fault of the camera. I'm hoping the plant will still be pretty tomorrow and maybe I can try again in bright daylight. That is, of course, if we get some. Lots of cold, a few sprinkles of snow, but not too much in the way of light lately.

New Year

Happy New Year everyone! I don't know about you but I'm looking forward to a Blessed year full of the richness and bounty of God's love. That would make it much like last year and the year before. God is good even when we don't recognize it.

I never bother to make New Years resolutions. They are a waste of time. I always think that if you are going to make changes, you will and you don't have to wait for a new year to kick over to do it. I think it is much better to make continual small adjustments to my behavior and character throughout the year than to try to make some grandiose change at the beginning of the year. I expect that that is why most people fail to live up to the resolution schemes.

One thing I can tell you for sure about 2010, I will be tatting more lace. Just to prove it, here is the finished Jingle Bell.

The bell was hung from the spruce tree out front and filmed in falling snow. I was aiming for a creative, white bell on a backdrop of dark green needles with a few falling flakes. After a dozen shots taken of a bell wildly spinning in the wind, all I got was a lot of blurry pictures and my new camera getting wet. I probably would have had better luck using the other side of the tree, but then I'd have to explain to the neighbours why I was standing out in the snow in my slippers shivering and taking a close up of a tree branch.

Snowflake and Jingle Bells

I'm still designing snowflakes. Here's yesterday's flake. I found some jingle bells and I know a couple of weeks ago I was making something and wishing I had some bells to add to it. Of course now that I have the bells I can't think of what it was that I wanted them for, so after I finished the snowflake I started another and morphed it into a bell. I think I'll add more to the bottom and make it taller. Or maybe I'll just start over.

Look! It's not a snowflake!

I'm still in a designing snowflake mode, which will probably last until January when I need to come up with some new designs for the seniors class. To give readers a break from the flurry of white stuff I thought I'd show you something else I designed. This one was done a couple of months ago when I was trying to think of ways to incorporate beads that didn't have to be strung on to start with. This worked, sort of.

Merry Christmas Snowflake with pattern

Here's another snowflake that just fell off the shuttles. It starts with a basic 6 ring daisy and requires 2 shuttles. It uses 2 split rings to climb from the daisy into the second row, but other that that it's all just ring and chain and I think it turned out kind of cute. For those of you in need of a quickie snowflake, here's the pattern. For anyone who doesn't know how to do split rings you can complete the daisy and cut the thread, then start again with ring "G" as a normal ring and just follow the pattern. There are normal joins from the rings on the second row to the top of the daisy petals and shuttle joins (lock joins) where the chains join to the tops of the daisy petals. There is 1 stitch which is easy to miss going from one petal to the next. So it's shuttle join on one petal, 1 stitch and then shuttle join on the next petal. The outer chains on row 3 are broken up with a ring and then a chain joined to the tip of the ring.

No Rings-For real this time

Can you see the difference? The bottom snowflake is the original which I though I had done entirely without rings except for the one in the middle. The first row is actually ring and chain but the rings are tiny. I re-tatted it last night and the top picture IS made without rings. The centre ring is a mock ring, but at first glance they are identical. The second snowflake appears to be a tiny bit bigger, but that may be due to some more aggressive blocking as the first was pinned to my blocking board and air dried, while the second was pinned to the ironing board and pressed.

Yet another snowflake

This is the latest design finished at 3:00 AM.

This one needs some tweaking on the chains. I should have made the first row 1 stitch longer so that the last one was equally divisible, but I didn't and had to add an extra stitch on the last row so it doesn't sit with each row neatly snugged up. It's an OK design but not anything really special. I have to get cracking on writing out the patterns for these designs. I only have 2 or 3 done so far. I can tat while sitting with hubby in the evening but drawing the patterns means being at the computer so it takes a little longer to get finished.

Writing out patterns is faster if it's done right after you completed the design because you can remember all of the stitch counts. Of course when getting to creating the drawing takes a while, there's usually a new design on the shuttles so the stitch counts get replaced by the new set. There are always a few where you have to go back and count the stitches. There will be a book eventually. I was hoping to have it done before Christmas and I might yet if I can get the computer time.

No Rings!

Well...there is one, but it could be a mock ring. I just wanted to see if I could make a snowflake shape without using rings. Not especially dramatic or particularly interesting, but it is lacy.

Like the previous snowflakes, this one can have a bead added to the centre for interest and it would probably make this one more attractive. It's also an ideal design for the lovely variegated HDT's since it's just one long continuous chain.

Another Snowflake

This is another of the same type of snowflake which can be used as is or have a one inch bead added to the centre. You'll see the beaded version in the composite picture posted a few days ago.
This is the snowflake I showed earlier but this time it's been blocked and it doesn't look like the design needs to be modified.

More Snow

Today's snowflake design, unblocked, hot off the shuttles.
This is another design that can incorporate a one inch Bead, Button, Picture or be left plain. I didn't like the way the design was going and then suddenly on the last row, I love how it looks. I think I might tweak the penultimate row a little, or not. I'll know better after it's blocked.

Rhinestones

I haven't blogged in ages. Well, that's not totally correct because I have been keeping up with the 25 Motif Challenge blog, I just haven't been keeping up with my own blog. Now that I'm all caught up I can show you what I've been tatting. I found these one inch diameter beads, the package calls them Rhinestones and I've been incorporating them into tatted snowflakes. A couple of them got extra large.

All of these designs can be made without the stones and some of them have 2 stones back to back so that they look the same from both sides. You could use any one inch size stone, bead, button or even a picture like the small wallet size photos they do for kid's school pictures. I think they'd look cute as Christmas ornaments.


I was thinking of doing a book of them, but then wondered if other folks would think they looked chintzy, inelegant and clunky with this big beady thing in the middle. So I modified it yet again so that the one inch bead cand be replaced with one inch of lace.

So what do you think? Can the world take one more book of snowflakes?

Edited to add

Here is a large picture of one of the pieces with a double stone. The blurriness is due to the depth of the stones being much greater than the flat lace. And yes I know it's still a bit of a tease, but what else will keep you wanting more? :-)

All that glitters isn't beads

I really challenged the ladies by throwing split rings at them last week and split rings with beads at the same time was way too much too soon. So taking a step back I rethought the process and came up with this:

It's the same basic idea with rings off the top of the chains added. In place of the beads we have size 10 thread with a metallic filament. Sparkle without hassle. Each of the ladies managed about one third of a snowflake during class. If they work on it at home, they should have one finished or nearly finished, by next week and we'll do another the same. Not spectacular, but at least it is something that they will be able to do and display on their Christmas tree.

Square Daisy

A round daisy in a square motif.

This is one of the designs in my new book Marvellous Motifs. I was playing around with square motifs, but I wanted a daisy in the middle of one and this was the results. When I had tatted it the first time I did it again in size 80 thread and it looked like it would work well as either earrings or as a pendant. The heart shaped bead was a perfect match and all I did was take the end of the ball thread on the last chain, feed it through the heart around a small pearl and back through the heart before I finished the chain. I quite like the way it looks and although I don't wear much tatted jewelry, this is one I will be wearing.

Still no web page for the book but the pricing in Canadian funds is:
Canada $20
USA $21
International $23

If you are interested email me and I can send you a PayPal invoice for it. My email address:
tatdlace at gagechek dot com.

Teaching

For the last 8 weeks I've been teaching a beginner's class in tatting at the local (well it's not so local, it's on the other side of town) seniors centre. It's a 2 hour class and for the first class some of the ladies thought it was just a social gathering. Sorry folks, I'm getting paid to teach and that's what I'm going to do. After some initial grumbling about, I'm too old for this, and nobody told me I'd have to think, we got down to tatting.

Day one we did chains in 2 colours of thread. Day 2 we started the beginner pattern flower bookmark in the sidebar. It's still mostly chains. Most of them came back the next week with a creditable bookmark and I started them on a small beaded zipper pull. It was just 4 rings with beads and they had it half done in class, but most of them failed to finish it. So I went back to a plain ring and chain edging. They got the flip down so that they're tatting OK, it's the joins that seem to be causing them grief.

I want to get them to the point of knowing rings, chains, split rings, split chains and beads so that by Christmas they can do this:

Sorry for the crappy picture, it wouldn't stop spinning. We did the beaded snowflake in class. It's just ring and chain with 3 beads in the centre of the chain to make a point. Most of them got it. One of the ladies really got into it, finished one snowflake and made another on her own.

Last week I showed them this ball without the middle band of split rings. I showed them that it was just 2 snowflakes laced together. They were quite impressed and it gave them something to work toward. When I pushed the middle band on the ball it really wowed them and gave them the desire to get split rings. I think the idea that they already had the skills to make it really helped give them the incentive to keep going.

Next week I'm going to get them to finish the second snowflake, although for some of them it may be just the one. We only have 4 more classes and I want them to know that they CAN tat on their own. Some are really trying to learn, but others, I think, just want the company.

They've asked if I'm going to do another class for the winter session. I've agreed to it although they may not run the class unless there are more people signed up for it. Most of the ladies want to come back for more so I guess we'll see.

Failed Designs

For the Design Tat class here are a couple of doilies created from pictures. The first is called Elephant Flake because this attempt at a snowflake came out in huge proportions. It's 10 inches from point to point and big enough to be called a doily, but it's really too open.
The second one looked good on the drawing board but failed in execution. The flower shapes are apparent t the points only because the open chains take nothing away from them. Of course the open chains lack the structure to allow it to hold it's shape and the method of tatting withe chains in the middle of the flowers worked but it was a sloppy way of achieving the design. Which is why it's not been blocked or drawn because I consider it a failed design.

Look what Wendy did with the design from Marvellous Motifs

When I created the Irish Rose Motif in the Marvellous Motifs book I knew that it and the companion design would fit together. The original pair shown on the front cover made a pretty little pin cushion so I knew the motifs would fit together but I didn't know how they would look done as a checkerboard style mat and I was really curious, but didn't think I had the time to tat up a sample for the book so I asked some of the folks on the tatting lists if they would like to try it out. Wendy was one of those brave enough to give it a whirl. She chose 3 different yellow/gold colours for the roses and a pale variegated green for the background colour.

While everyone was busy tatting away, it occurred to me that I tat pretty fast and maybe I could tat it. The other thing I realized after I had sent out the appeal for help, was that if it needed adjustment I wouldn't know where or by how much unless I did it myself. So I started whipping through the design, just doing the base rose so that I could see the shape/size results.

Once I had the 9 motifs completed, it kind of looked unfinished so after a couple of tries I worked out a finishing row and sent it out to the various test tatters so they could have nice finished pieces too. Wendy sent me a picture of her partially completed piece and we discussed using the background colour or the rose colour for the edging. I used the background colour for the model I did. Wendy used the rose colour and I like hers better, but you can judge for yourself. Mine was filmed sitting on the rock outside which isn't flat and explains it's less than square appearance. Here's a picture of mine so you can compare.

Busier than a one armed paper hanger

That's how I've been feeling. I'm trying to tat all of the designs from the Design-Tat course and I don't have a lot of time for it right now. I've just returned from the tatting class I teach at the senior's centre. The ladies are all enthusiastic, although some of them are telling me that I'm giving them headaches. We're only working with simple ring and chain designs so it's hard to imagine that they'd find it difficult. They seem flummoxed when I tell them they CAN do it. I think they're used to people who dumb things down for seniors and I just refuse to let them quit.

We started with the Flower Bookmark, it's the Beginner pattern in the sidebar 3 of the ladies completed a bookmark and the next week we went on to working with beads. That seemed to be challenging, so the next week I went back to simple ring and chain edging, but that seemed to confuse them again. This week I did a simple ring and chain snowflake with beads and we got about a third of the way through it in class, so I'm hopeful that by next week they will have made progress.

I took my Marvellous Motifs in for them to look at, but honestly most of the designs are probably beyond them at this point. Still they all seem to want to buy it. There are 6 more weeks of class and they should have a good grasp of it by then, at least everything except clunies, but I'm hoping we get to them as well.

Speaking of Marvellous Motifs I was able to get to the post office and get the shipping costs so here's the price in Canadian funds including shipping.

Canada $20
USA $21
International $23

Hubby is working on a project for a client and so it's not up on the web site yet, but if you email me I can send you a PayPal invoice for it. My email address:
tatdlace at gagechek dot com.

Happy Thanksgiving

I'm stuffed! We have had our Thanksgiving dinner, an enormous turkey with mashed potatoes and gravy, broccoli, cauliflower, corn and baked sweet potatoes. Both of us are replete with dinner and the apple pie and ice cream planned for dessert, will have to wait. I'm thankful for the abundance of food, for the luxury of being able to cook a festive dinner and enjoy it in peace. I am thankful that I live in a country where folks mostly get along. There isn't a war going on around me like there is in some parts of the world. I am thankful that I have the freedom to do things I enjoy doing like tatting. I'm thankful for a wonderful husband who supports my efforts in whatever I attempt.

As good as all that is, I am most thankful that Jesus laid aside His Divine nature and became a man showing us how to live. Then He died as a sacrifice for all mankind that whoever would choose to believe in Him could come under that banner of His love and forever be united to God. I am thankful that I made that choice and was accepted into the family of God. I am thankful that every day He is my source and my supply. He meets all my needs and his well of love never runs dry, He is never too tired to listen, never too weak to save. On the contrary, the same power that allowed him to take His life back up again after He laid it down as a sacrifice for all, works now in Him to bring all mankind to Himself.

Thank You God! You're the Greatest!

Marvellous Motifs

After what has seemed like an interminable amount of time I can finally show you my latest project. I started about a year ago working on square motifs that could be used for a larger project like a shawl. I wanted something that was not too open so that it could be made in a thicker thread which would work up faster and still be lacy. Then I got side tracked and started working on hearts and one thing led to another.

I've been trying to keep up with work and the 25 Motif Challenge and the Round Robins and the Design-Tat course and more recently I've been teaching the seniors to tat at the local rec centre, in between which we've had some fun going on with car repairs and the launch of new software and... Well, you get the idea.

Today I finally managed to get the first few copies of my newest book done. Marvellous Motifs containing 19 versatile patterns. Here's a sneak peek of the front cover. Ordering information will be posted as soon as I know what the shipping costs will be.

I was able to get to the post office and get the shipping costs so here's the price in Canadian funds including shipping.

Canada $20
USA $21
International $23

Hubby is working on a project for a client and so it's not up on the web site yet, but if you email me I can send you a PayPal invoice for it. My email address:

tatdlace at gagechek dot com.