Out with the Old in with the New

Our 33 year old furnace has been limping along that last few years with a lot of coaxing. It heats well enough but it has broken down a number of times. A couple of weeks ago I was up tatting after hubby had gone to bed and I heard a loud clunk. I realized after a while that I hadn't heard the furnace come on for quite a long time so I woke him up to check it out. Whatever it is that fell off he was able to put back on and the furnace started up again. The one thing you don't want in a cold Canadian winter is a furnace that stops working in the middle of the night. Good bye old friend.

Yesterday they installed a new energy efficient furnace which is supposed to save us money on our heating bill. Seeing as the government is allowing rebates on these things we had an energy audit done and we were left with a number of things that we can do to qualify for the rebates. It turns out that we can get back about 50% of the cost of the furnace. Of course the cost of the energy audit will eat up about half of that amount, but still, it is a considerable savings. Hello handsome. I hope you'll be able to keep me as cozy and warm as your predecessor did.

The old unit had a quarter horse power motor, this unit has a half. It may use gas more efficiently but gas is only half of the expense. The other half is the cost of running the blower motor and with a motor that is twice the size you anticipate twice the cost in running it. I guess we'll see.

Lest you think I haven't been tatting at all, what with all this uninteresting stuff going on, here's the latest bits to fall off the shuttle Snowflake 21 is in process and will have to be re tatted because I don't like the centre. I ought to stop now because if the centre changes in size, it's going to change the rest of it, but I have 2 full CTM shuttles and this will be the third time in a row that I've thrown away 2 almost full shuttles of thread.

As a designer I frequently cut work off and re-join thread in. That's why there is a tutorial for adding in thread on the side bar. I do it. a lot. I'm good at it. I have to be. Working on a series of snowflakes I have found myself using designs where adding in thread is most inconvenient. You may have seen in some of the recent pictures, lots of thread ends. I have finished one snowflake and then just started another with whatever amount of thread there is on the shuttle at the time.

The last few designs I have needed a full row's worth of CTM thread. When I've needed to start again it has meant pulling the thread off the shuttle, or in my case popping out the bobbin with the half done bits and popping in 2 new CTM bobbins. Since these are new designs and I don't know where I'm going with them or how they might change along the way, I want full bobbins before I start. I've run out of empty bobbins. I don't like leaving half done designs on the bobbins. I'd rather cut the thread off and start again. I have a dozen little skeins of thread I've already pulled off the shuttles and it's really starting to bug me. I think all of this duct pulling/ energy audit/furnace installation stuff is really messing with my creativity. I'm finding the only time where I can sit and work undisturbed is in the middle of the night. Literally. I'm not at my best creativity wise in the middle of the night and that's bugging me too.

Here's hoping I can get my brain in gear and get some serious designing done instead of half full shuttles and twisted little skeins of unfulfilled dreams.

Nineteen

Only 11 more designs to go. Twelve of the nineteen are blocked and drawn. Four more are blocked but not drawn. Two more are sitting by my tatting seat. This one looks pretty, but has a few stinking long split chains, one of which needed to be tatted in reverse order. I may need to re-think it, as the only way to tat it in one go, it needs a joining ring in the middle of a split chain.

My designing lately has taken a back seat to demolition and other "fun" stuff. Our furnace is over 30 years old and you can no longer get parts for it. To take advantage of government rebates, we've decided now is a good time to get the job done. We called several companies and had them come out and take dimensions, arranged for the energy audit and then started removing some extraneous duct work in preparation.

This mess piled up beside the bike is the remains of some duct work originally installed to pump heat into the garage to keep it toasty warm in the winter so that the shop could be used. Unfortunately a minor repair 30 years ago resulted in the furnace being red tagged and the gas was shut off. We couldn't get it turned back on until the opening into the garage was sealed. Once it was sealed off, it served no purpose, but it did connect to the duct work that they are about to start working on to install the new furnace. We had to remove duct work that was about a foot across, accessed from an opening that was 7 inches wide. Do you see a problem with those numbers?

Part of this was done by working overhead in the basement and part of it from the 7 inch wide opening in the garage wall. Much of it was cut out in sections using metal cutters. Boy, does that hurt the thumbs after a while. We took turns working at it and finally resorted to using a cut off blade. We wore out 2 cut off blades and hubby got gashed on sharp metal bits, but it's finally out and the openings in the basement and in the garage have been sealed back up. AFTER, we got most of it out, we realized that 30 years ago a section of the garage wall had been removed to give access so that the whole Z shaped thing could be inserted into the wall in one piece. Which explained how things were screwed together from both sides when they couldn't be reached from either the basement or the garage.

I am SO looking forward to getting this installation completed so we can get back to normal.

I'm on a roll.....

....downhill. I began this one and realized at this point that if I continued it would end up being doily size and not just a snowflake so I cut it off and started again.

I tried something along the same lines adjusting for the mistakes in the previous version. I wanted a centre of cluny leaves which I thought would look good but it turned out to be just a mess.

I've had 3 designs in a roll that have been total duds. It's enough to make me want to quit designing. I expect it's just that I've been pushing too hard instead of letting it flow. I think I need to change my perspective and maybe change the kinds of things I'm working on.

BLECH!!

I used nail clippers to snip the shuttles off the last snowflake while I was sitting in the waiting room and knowing that I was going to be waiting a little longer I started right in on a new design, and just started making a ring without thinking or planning much. I hid the thread ends as I worked the first ring and chain and just carried on.

After I did the first ring neatly hiding ends, I realized I had only put 3 picots on it so I thought I'd do the next snowflake vertical. What I mean by that, is working the design from centre to outer rim and back to centre, for each of the 6 sides of the snowflake. I threw in a cloverleaf to broaden out the section of the snowflake and then had no inspiration of where to go from there so I lamely attached the chain to the side of the ring and slapped on a large ring at the point. Coming down the second side of the point, the chain had nothing to join into yet and the join was on the wrong side of the chain.

You can do it by slipping a spacer in at the appropriate point so that you can join into it later but it's what I call an "ugly" design. Not ugly in final appearance, but ugly in the way it needs to be worked.

After a couple of repeats I ran out of thread and couldn't whip up enough enthusiasm for the design to add in the thread to finish it. It's disgusting and I'm not going to finish it.

What else? A Snowflake

Started last night, finished this morning sitting in the waiting room while hubby got his hearing aid adjusted.

Best intentions and all that jazz

I thought that this year, since I have kind of cleared the deck and I don't have anything pressing that needs doing, that I might make the attempt to blog every couple of days. For the last little bit I've been blogging about the snowflakes Ive been designing and it's given me a reason to post stuff every few days. It hasn't been all that hard really, since there is lots of bloggy, tatty stuff to talk about. I was wondering why I hadn't been blogging all along and then it hit me.

The reason that there is a clear deck is that the Marvellous Motifs book is done, the Design-Tat group is finished and the senior's tatting class is in hiatus till January 12, 2010.

The new book of snowflakes is about quarter done. 15 designs completed with 9 already drawn. I have plans for a book of 30 designs, so there is one for each day of the month. There will be a new Design-Tat group in the spring and I need a dozen -easy for first time tatters- patterns to create for the senior's group. Then there is the hour or so every day to keep up with the 25 Motif Challenge blog and whatever time out of my schedule hubby needs for me to help out with whatever project he has going on.

I guess that explains why I don't blog regularly. All this "free time" is just the lull between the busy-ness of living. Just in case you're wondering, here's most of the snowflakes so far. I did a few with the rhinestone centres but I'm re-doing them without as well (nothing like doubling up the work).

That should just about keep me hopping until it's time to do the massive bookkeeping job that is doing taxes for running 2 businesses..........I think I need a big bottle of time.

Flower Power

My one living room window faces north and the blinds are almost always closed because that same window faces the 3 story townhouses behind us and offers them a front row seat at whatever it is that we're doing. Consequently the house plants don't get enough light to survive let alone flower. I used to have over 100 plants on my south facing windowsill until the parrot got to them, but that's another story. The violets I buy in flower, never bloom again, the Amaryllis I bought last year flowered gloriously and grew a crown of leaves which died off, one after the other this fall leaving me with a stump. I'm hopeful that it has gone dormant and will surprise me soon with another big showy flower. As for the rest of the plants they are mostly just green leaves that look like overgrown grass.

Some time ago my sister gave me a potted cutting from a Schlumbergera more commonly know as a Christmas cactus. It wasn't anything remarkable, just a few leaves stuck into a pot and I put it on the table by the patio doors and hoped for the best. I had reason to open the curtains the other day and noticed a bud on the tip of one leaf. I had no idea what colour the flowers would be and the bud appeared mostly white. White's OK but in a dreary Canadian winter I long for vibrant reds, that splash of "in your face" colour that says 'Hey! Look at me, I'm alive!"

So want to see what it is? It's as close as a cactus gets to red.

Of course you know that in a house where there is exactly ONE flowering plant, you really want to be careful with it, especially while it's blooming. Just as a precaution, I mentioned this to hubby to make sure the delicate flowers didn't get bruised with the curtains being opened and closed as we take out the trash. Of course you know it was inevitable. It's the one plant doomed to get knocked over and turned upside down on it's head. I picked it up and put it back in the pot and pulled it out from behind the curtains to keep it from getting frozen as we go in and out and as an extra safety measure, put it on the dining room table so that I can enjoy it's colour for as long as it blooms. Of course since I moved it to the dining room table, the table has become a necessary work bench and it's been leaned on, knocked over again and had all manner of bits and pieces of things laid on top of it.

If it survives, I'll take a cutting to plant on the opposite side of the pot to balance it out. The weight of all of the leaves hanging to one side is what caused it to topple in the first place. Just to prove that it did live long enough to flower I at least have a picture of it, and while I was at it, I made an attempt to use the macro setting on the camera.
Crappy lighting and my crappy photography skills are to blame for this less than stellar picture. I'm sure it's not the fault of the camera. I'm hoping the plant will still be pretty tomorrow and maybe I can try again in bright daylight. That is, of course, if we get some. Lots of cold, a few sprinkles of snow, but not too much in the way of light lately.

New Year

Happy New Year everyone! I don't know about you but I'm looking forward to a Blessed year full of the richness and bounty of God's love. That would make it much like last year and the year before. God is good even when we don't recognize it.

I never bother to make New Years resolutions. They are a waste of time. I always think that if you are going to make changes, you will and you don't have to wait for a new year to kick over to do it. I think it is much better to make continual small adjustments to my behavior and character throughout the year than to try to make some grandiose change at the beginning of the year. I expect that that is why most people fail to live up to the resolution schemes.

One thing I can tell you for sure about 2010, I will be tatting more lace. Just to prove it, here is the finished Jingle Bell.

The bell was hung from the spruce tree out front and filmed in falling snow. I was aiming for a creative, white bell on a backdrop of dark green needles with a few falling flakes. After a dozen shots taken of a bell wildly spinning in the wind, all I got was a lot of blurry pictures and my new camera getting wet. I probably would have had better luck using the other side of the tree, but then I'd have to explain to the neighbours why I was standing out in the snow in my slippers shivering and taking a close up of a tree branch.

Snowflake and Jingle Bells

I'm still designing snowflakes. Here's yesterday's flake. I found some jingle bells and I know a couple of weeks ago I was making something and wishing I had some bells to add to it. Of course now that I have the bells I can't think of what it was that I wanted them for, so after I finished the snowflake I started another and morphed it into a bell. I think I'll add more to the bottom and make it taller. Or maybe I'll just start over.

Look! It's not a snowflake!

I'm still in a designing snowflake mode, which will probably last until January when I need to come up with some new designs for the seniors class. To give readers a break from the flurry of white stuff I thought I'd show you something else I designed. This one was done a couple of months ago when I was trying to think of ways to incorporate beads that didn't have to be strung on to start with. This worked, sort of.

Merry Christmas Snowflake with pattern

Here's another snowflake that just fell off the shuttles. It starts with a basic 6 ring daisy and requires 2 shuttles. It uses 2 split rings to climb from the daisy into the second row, but other that that it's all just ring and chain and I think it turned out kind of cute. For those of you in need of a quickie snowflake, here's the pattern. For anyone who doesn't know how to do split rings you can complete the daisy and cut the thread, then start again with ring "G" as a normal ring and just follow the pattern. There are normal joins from the rings on the second row to the top of the daisy petals and shuttle joins (lock joins) where the chains join to the tops of the daisy petals. There is 1 stitch which is easy to miss going from one petal to the next. So it's shuttle join on one petal, 1 stitch and then shuttle join on the next petal. The outer chains on row 3 are broken up with a ring and then a chain joined to the tip of the ring.

No Rings-For real this time

Can you see the difference? The bottom snowflake is the original which I though I had done entirely without rings except for the one in the middle. The first row is actually ring and chain but the rings are tiny. I re-tatted it last night and the top picture IS made without rings. The centre ring is a mock ring, but at first glance they are identical. The second snowflake appears to be a tiny bit bigger, but that may be due to some more aggressive blocking as the first was pinned to my blocking board and air dried, while the second was pinned to the ironing board and pressed.

Yet another snowflake

This is the latest design finished at 3:00 AM.

This one needs some tweaking on the chains. I should have made the first row 1 stitch longer so that the last one was equally divisible, but I didn't and had to add an extra stitch on the last row so it doesn't sit with each row neatly snugged up. It's an OK design but not anything really special. I have to get cracking on writing out the patterns for these designs. I only have 2 or 3 done so far. I can tat while sitting with hubby in the evening but drawing the patterns means being at the computer so it takes a little longer to get finished.

Writing out patterns is faster if it's done right after you completed the design because you can remember all of the stitch counts. Of course when getting to creating the drawing takes a while, there's usually a new design on the shuttles so the stitch counts get replaced by the new set. There are always a few where you have to go back and count the stitches. There will be a book eventually. I was hoping to have it done before Christmas and I might yet if I can get the computer time.

No Rings!

Well...there is one, but it could be a mock ring. I just wanted to see if I could make a snowflake shape without using rings. Not especially dramatic or particularly interesting, but it is lacy.

Like the previous snowflakes, this one can have a bead added to the centre for interest and it would probably make this one more attractive. It's also an ideal design for the lovely variegated HDT's since it's just one long continuous chain.

Another Snowflake

This is another of the same type of snowflake which can be used as is or have a one inch bead added to the centre. You'll see the beaded version in the composite picture posted a few days ago.
This is the snowflake I showed earlier but this time it's been blocked and it doesn't look like the design needs to be modified.

More Snow

Today's snowflake design, unblocked, hot off the shuttles.
This is another design that can incorporate a one inch Bead, Button, Picture or be left plain. I didn't like the way the design was going and then suddenly on the last row, I love how it looks. I think I might tweak the penultimate row a little, or not. I'll know better after it's blocked.

Rhinestones

I haven't blogged in ages. Well, that's not totally correct because I have been keeping up with the 25 Motif Challenge blog, I just haven't been keeping up with my own blog. Now that I'm all caught up I can show you what I've been tatting. I found these one inch diameter beads, the package calls them Rhinestones and I've been incorporating them into tatted snowflakes. A couple of them got extra large.

All of these designs can be made without the stones and some of them have 2 stones back to back so that they look the same from both sides. You could use any one inch size stone, bead, button or even a picture like the small wallet size photos they do for kid's school pictures. I think they'd look cute as Christmas ornaments.


I was thinking of doing a book of them, but then wondered if other folks would think they looked chintzy, inelegant and clunky with this big beady thing in the middle. So I modified it yet again so that the one inch bead cand be replaced with one inch of lace.

So what do you think? Can the world take one more book of snowflakes?

Edited to add

Here is a large picture of one of the pieces with a double stone. The blurriness is due to the depth of the stones being much greater than the flat lace. And yes I know it's still a bit of a tease, but what else will keep you wanting more? :-)

All that glitters isn't beads

I really challenged the ladies by throwing split rings at them last week and split rings with beads at the same time was way too much too soon. So taking a step back I rethought the process and came up with this:

It's the same basic idea with rings off the top of the chains added. In place of the beads we have size 10 thread with a metallic filament. Sparkle without hassle. Each of the ladies managed about one third of a snowflake during class. If they work on it at home, they should have one finished or nearly finished, by next week and we'll do another the same. Not spectacular, but at least it is something that they will be able to do and display on their Christmas tree.

Square Daisy

A round daisy in a square motif.

This is one of the designs in my new book Marvellous Motifs. I was playing around with square motifs, but I wanted a daisy in the middle of one and this was the results. When I had tatted it the first time I did it again in size 80 thread and it looked like it would work well as either earrings or as a pendant. The heart shaped bead was a perfect match and all I did was take the end of the ball thread on the last chain, feed it through the heart around a small pearl and back through the heart before I finished the chain. I quite like the way it looks and although I don't wear much tatted jewelry, this is one I will be wearing.

Still no web page for the book but the pricing in Canadian funds is:
Canada $20
USA $21
International $23

If you are interested email me and I can send you a PayPal invoice for it. My email address:
tatdlace at gagechek dot com.

Teaching

For the last 8 weeks I've been teaching a beginner's class in tatting at the local (well it's not so local, it's on the other side of town) seniors centre. It's a 2 hour class and for the first class some of the ladies thought it was just a social gathering. Sorry folks, I'm getting paid to teach and that's what I'm going to do. After some initial grumbling about, I'm too old for this, and nobody told me I'd have to think, we got down to tatting.

Day one we did chains in 2 colours of thread. Day 2 we started the beginner pattern flower bookmark in the sidebar. It's still mostly chains. Most of them came back the next week with a creditable bookmark and I started them on a small beaded zipper pull. It was just 4 rings with beads and they had it half done in class, but most of them failed to finish it. So I went back to a plain ring and chain edging. They got the flip down so that they're tatting OK, it's the joins that seem to be causing them grief.

I want to get them to the point of knowing rings, chains, split rings, split chains and beads so that by Christmas they can do this:

Sorry for the crappy picture, it wouldn't stop spinning. We did the beaded snowflake in class. It's just ring and chain with 3 beads in the centre of the chain to make a point. Most of them got it. One of the ladies really got into it, finished one snowflake and made another on her own.

Last week I showed them this ball without the middle band of split rings. I showed them that it was just 2 snowflakes laced together. They were quite impressed and it gave them something to work toward. When I pushed the middle band on the ball it really wowed them and gave them the desire to get split rings. I think the idea that they already had the skills to make it really helped give them the incentive to keep going.

Next week I'm going to get them to finish the second snowflake, although for some of them it may be just the one. We only have 4 more classes and I want them to know that they CAN tat on their own. Some are really trying to learn, but others, I think, just want the company.

They've asked if I'm going to do another class for the winter session. I've agreed to it although they may not run the class unless there are more people signed up for it. Most of the ladies want to come back for more so I guess we'll see.

Failed Designs

For the Design Tat class here are a couple of doilies created from pictures. The first is called Elephant Flake because this attempt at a snowflake came out in huge proportions. It's 10 inches from point to point and big enough to be called a doily, but it's really too open.
The second one looked good on the drawing board but failed in execution. The flower shapes are apparent t the points only because the open chains take nothing away from them. Of course the open chains lack the structure to allow it to hold it's shape and the method of tatting withe chains in the middle of the flowers worked but it was a sloppy way of achieving the design. Which is why it's not been blocked or drawn because I consider it a failed design.

Look what Wendy did with the design from Marvellous Motifs

When I created the Irish Rose Motif in the Marvellous Motifs book I knew that it and the companion design would fit together. The original pair shown on the front cover made a pretty little pin cushion so I knew the motifs would fit together but I didn't know how they would look done as a checkerboard style mat and I was really curious, but didn't think I had the time to tat up a sample for the book so I asked some of the folks on the tatting lists if they would like to try it out. Wendy was one of those brave enough to give it a whirl. She chose 3 different yellow/gold colours for the roses and a pale variegated green for the background colour.

While everyone was busy tatting away, it occurred to me that I tat pretty fast and maybe I could tat it. The other thing I realized after I had sent out the appeal for help, was that if it needed adjustment I wouldn't know where or by how much unless I did it myself. So I started whipping through the design, just doing the base rose so that I could see the shape/size results.

Once I had the 9 motifs completed, it kind of looked unfinished so after a couple of tries I worked out a finishing row and sent it out to the various test tatters so they could have nice finished pieces too. Wendy sent me a picture of her partially completed piece and we discussed using the background colour or the rose colour for the edging. I used the background colour for the model I did. Wendy used the rose colour and I like hers better, but you can judge for yourself. Mine was filmed sitting on the rock outside which isn't flat and explains it's less than square appearance. Here's a picture of mine so you can compare.

Busier than a one armed paper hanger

That's how I've been feeling. I'm trying to tat all of the designs from the Design-Tat course and I don't have a lot of time for it right now. I've just returned from the tatting class I teach at the senior's centre. The ladies are all enthusiastic, although some of them are telling me that I'm giving them headaches. We're only working with simple ring and chain designs so it's hard to imagine that they'd find it difficult. They seem flummoxed when I tell them they CAN do it. I think they're used to people who dumb things down for seniors and I just refuse to let them quit.

We started with the Flower Bookmark, it's the Beginner pattern in the sidebar 3 of the ladies completed a bookmark and the next week we went on to working with beads. That seemed to be challenging, so the next week I went back to simple ring and chain edging, but that seemed to confuse them again. This week I did a simple ring and chain snowflake with beads and we got about a third of the way through it in class, so I'm hopeful that by next week they will have made progress.

I took my Marvellous Motifs in for them to look at, but honestly most of the designs are probably beyond them at this point. Still they all seem to want to buy it. There are 6 more weeks of class and they should have a good grasp of it by then, at least everything except clunies, but I'm hoping we get to them as well.

Speaking of Marvellous Motifs I was able to get to the post office and get the shipping costs so here's the price in Canadian funds including shipping.

Canada $20
USA $21
International $23

Hubby is working on a project for a client and so it's not up on the web site yet, but if you email me I can send you a PayPal invoice for it. My email address:
tatdlace at gagechek dot com.

Happy Thanksgiving

I'm stuffed! We have had our Thanksgiving dinner, an enormous turkey with mashed potatoes and gravy, broccoli, cauliflower, corn and baked sweet potatoes. Both of us are replete with dinner and the apple pie and ice cream planned for dessert, will have to wait. I'm thankful for the abundance of food, for the luxury of being able to cook a festive dinner and enjoy it in peace. I am thankful that I live in a country where folks mostly get along. There isn't a war going on around me like there is in some parts of the world. I am thankful that I have the freedom to do things I enjoy doing like tatting. I'm thankful for a wonderful husband who supports my efforts in whatever I attempt.

As good as all that is, I am most thankful that Jesus laid aside His Divine nature and became a man showing us how to live. Then He died as a sacrifice for all mankind that whoever would choose to believe in Him could come under that banner of His love and forever be united to God. I am thankful that I made that choice and was accepted into the family of God. I am thankful that every day He is my source and my supply. He meets all my needs and his well of love never runs dry, He is never too tired to listen, never too weak to save. On the contrary, the same power that allowed him to take His life back up again after He laid it down as a sacrifice for all, works now in Him to bring all mankind to Himself.

Thank You God! You're the Greatest!

Marvellous Motifs

After what has seemed like an interminable amount of time I can finally show you my latest project. I started about a year ago working on square motifs that could be used for a larger project like a shawl. I wanted something that was not too open so that it could be made in a thicker thread which would work up faster and still be lacy. Then I got side tracked and started working on hearts and one thing led to another.

I've been trying to keep up with work and the 25 Motif Challenge and the Round Robins and the Design-Tat course and more recently I've been teaching the seniors to tat at the local rec centre, in between which we've had some fun going on with car repairs and the launch of new software and... Well, you get the idea.

Today I finally managed to get the first few copies of my newest book done. Marvellous Motifs containing 19 versatile patterns. Here's a sneak peek of the front cover. Ordering information will be posted as soon as I know what the shipping costs will be.

I was able to get to the post office and get the shipping costs so here's the price in Canadian funds including shipping.

Canada $20
USA $21
International $23

Hubby is working on a project for a client and so it's not up on the web site yet, but if you email me I can send you a PayPal invoice for it. My email address:

tatdlace at gagechek dot com.

I spoke too soon

Well I thought our car troubles were over, but it turned out they were only beginning. A few days after the new injector was installed the car started sounding rough again so we took it back for Fred, the mechanic to take another look at it. After a brief examination he though he saw sparks coming from one of the coils and anticipated that the housing was cracked. By this time we've learned the routine and head back to the parts store to get a new coil.

The garage and the parts store are on the same street just a few blocks apart, and this time, although the engine sounds bad, we can at least still drive it to get the parts. We are fortunate that Fred is willing to drop what he's doing to work on our car and he proceeds to remove the old coil. Sure enough, it has a couple of cracks in it, but when he attempts to use the new coil he realizes that we have been sold the wrong part and this one won't fit on our car so he has to pull one out of stock. That's all right because this particular part is only about $10 more.

The new part is installed and Fred starts plugging in the spark plug wires, only for some reason one of them doesn't make a solid connection. He pushes the wire further into the boot so that the connector inside is closer to the end. That's normally what you would do. While we are watching, he still has trouble getting it to connect so instead of fighting with it he sticks needle nose pliers inside the boot and pulls the connector up, which is good, and out, which is not so good. He gets the connector on and jams the boot over top of it. So half an hour later it's connected, but not very well.

Everything gets put back together and the car runs, but it's noisy and he assures us that it's just because the battery had been disconnected while he was working on it and the computer has to relearn everything. He suggests that maybe there's a problem with the spark plug wires (Well I guess, Bozo!) and maybe we ought to replace them.

The wrong part gets taken back to the store and we come home with the car chugging just like it did when we took it in. When we get home and inspect the old coil and see that although there is a crack in the housing, it's just on the surface and doesn't go right through. We test it with the meter and it appears to be OK. So it looks like we replaced a part that didn't need replacing. The only way to know for sure is to swap it out with one of the other coils and see what happens, but that's a lot of work and we already have a lot to do.

We check in with the garage around the corner and ask if they have an old spark plug wire we can use for testing. We put new wires and spark plugs on last year and we don't drive much so the wires should be OK. We use the test wire and use it to replace each wire one at a time. Everything checks out OK but just in case we bicycle back up to Canadian Tire and get a new set of spark plug wires.

I don't pay a lot of attention to car engines but I've seen some where the spark plugs are all lined up across the top of the engine. Ours aren't. 3 of them are along the bottom front, but 3 of them are behind the engine along the back between the engine and the fire wall. The only way to get to them is to remove the alternator which you can't do unless you remove the drive belt. Garages have a special tool for the purpose, but Rob has done this so often he made his own. It's like a metal yard stick with a bolt on the end that you can use to spring down the bracket and release the belt. Then it's just removing a few bolts and the alternator can be lifted out of the way. Rob's not a mechanic, but one of his first jobs was working on the assembly line building car engines, so he knows more about what makes cars go than the average guy.

We carefully test the continuity of each new wire to make sure they're all OK, then we remove the old set, clean and gap the spark plugs and replace each wire neatly fitting everything into the harness and wrapping the protective coils around them at the places where the wires lay close to the engine. The alternator goes back in place and gets bolted down, the battery gets re-connected and we give it a try. No change, it still sputters.

That means that we have another problem inside the engine. This time we've already seen the engine apart and Rob is confident that he can do the job himself so he started taking the engine apart. There's a lot of "stuff" attached to an engine that you have to remove before you can even unbolt the plenum and lift it off to look inside. All of the sensors and the intake manifold have to be removed and held out of the way while you work.

Then the wires to the fuel injectors have to be removed and the fuel rail unbolted. The hose ends are capped with rubber stoppers so that we don't leak gas all over the place. We have already tested and know that the spark is getting through to the fuel injectors so we take them off and test them one at a time. I don't know anything about this stuff, but my job is to be a third hand and hold things. Hold things out of the way so that other parts can be reached, hold bits and pieces as they are removed or replaced and hold parts or probes as things are being tested. The fuel injectors read 12 except for one which reads 8 and the new one just installed which reads 0. Zero, and it's new. We can tell it's the new one because all of the previously installed fuel injectors have black O rings. The new unit has a red O ring.

Rob takes pictures of everything. He scans the important information on the sides of boxes and takes pictures of all of the parts that he puts on. He also takes pictures of the things he takes apart. It's easier to take a picture and know which order things are in than it is to try to remember when you are reassembling. We know the new injector had the red O ring because we have the picture of it, in the box, that we took in the store, when we bought it.

The good news is that we know what's wrong and how to fix it. The bad news is that the store that has the parts is 7 km away and the engine is apart. Before we go back to the store we call to tell them what has happened and that we will be in to return it. In the interim a friend emails us to say that the company he works for has all the parts and he can get them for us much cheaper because he gets an employee discount. So we return the bad injector and get the refund then bicycle on to the next shop to pick up 2 new injectors and a couple of other pieces we need and back home again.

The new injectors get installed and we start replacing pieces in reverse order. Since we have the wires out of the engine we take the time to test each wire and carefully re-tape them and replace the old brittle wire coil with new. We get ready to hook the fuel line back up and realize we have a major problem. The flexible rubber hose that connects to the engine has a metal fitting, kind of like at the end of a garden hose, that screws onto the pipe going into the engine. It's a special kind of rubber hose that can withstand the high temperature and high pressure going into the engine and it has small split right at the fitting. If the split was in the middle of the hose we could just cut the hose, insert a connector and hold the pieces together with fuel clamps, but where it is there isn't anything we can do to fix it. No hose, no car.

This new problem is worse than all of the others combined because if we can't get a hose we can't repair the car. So we start calling first the dealer, because some things don't change and they might still use the same type of hose in newer cars. No luck there, they don't use that particular fitting any more. Then we try the after market stores, they don't carry it either, so we go to the recycling stores and see what we can find there. Our options are limited because most junk yards are on the outskirts of the city in remote areas and without the car working we only go where we can bicycle to unless we can get someone else to drive us out to get the parts in the middle of the day. One shop doesn't have anything but one of the guys who works there thinks he might have a hose and he's willing to drop it off at the house. He dropped by with a hose which was unfortunately too short, but after he sees the car and where it needs to fit he thinks he can get one. Thankfully he did, and after some adjustment the hose was attached.

Now it's just a matter of finishing off the re-assembly of the engine and we're good to go. Just to be safe Rob checks to make sure how tight the plenum needs to be and he finds that it should be torqued to 25 ft/lbs and he carefully torques each bolt in sequence. There is a specific order for these things although a lot of mechanics don't bother doing it properly, Rob always does. The last bolt is bolted the last clip is clipped and and the battery is re-connected. Then we get to turn the engine over and see if it runs. After a few little sputters as the air in the gas line gets moved through the system the engine roars to life. Success at last! I start supper and he takes it around the block to check it out.

After supper we decide to take it for a slightly longer drive so that the computer can re-learn the system. Rob starts the car and there's a loud clang and the car starts backfiring. That's not good.

Back under the hood again to see what's happening. Really, REALLY bad news. The plenum is cracked. The plenum is the top of the engine. It locks down over top of the engine and created the vacuum that makes the engine work. The backfiring is caused because there is no vacuum when the plenum cracked. At this point most people would give up. "Give up" isn't in hubby's vocabulary.

After looking at it he figures that if he can find some way to secure the broken piece back onto the plenum, that he may be able to get it working well enough to drive. He needs to be able to hold both pieces together accurately and tightly while he drills through both pieces. Then he has to use a drill bit long enough to drill through the side of the plenum without damaging the surface of it, because once the repair is completed the surface needs to be totally smooth and flat or it will leak air. Not having a drill bit long enough he first has to make one by inserting a bit into a rod and securing it with a pin through the side.

Once that is accomplished he needs to find a way of holding the pieces together. This gizmo is apparently called a chain grip. It's kind of like a vise grip with a bicycle chain where the gripping part is usually found. I wonder if the guy who invented it need to fix an odd shaped part like this?

It held the pieces firmly in place while two tiny holes were drilled. The holes were tapped and heat treated bolts inserted and tightened down. Miracle of miracles, it worked! The repaired plenum was bolted into place with some liquid gasket used along all of the seam lines of the repair. Once again we tried it out. Vroom, VROOM. We have car!

We're not stupid enough to press our luck, the next day we head out to the recycling yard, They used to call them junk yards, but we're so much more environmentally conscious these days. The have another Z24 with an intact plenum, we just have to disassemble the car to get to it. While we're at it we pick up all of the other little bits we need like hoses and clips that are broken on our car.

Hey, we're getting good at this,we can disassemble and reassemble the engine faster than a garage mechanic. We know where all the little bits go and the easiest way to get them in place....AND I HOPE WE NEVER HAVE TO DO IT AGAIN!!!!!!!!!!

Wheeeee!

After days and weeks of feeling like I've been running as fast as I can, I think, I'm all caught up. In the spring I volunteered to teach the seniors at the local rec centre how to tat. After the open house several weeks ago I was told that they wouldn't go ahead with it unless there were at least 6 people signed up for the 12 week course. (12 weeks!, who came up with that number?) There were 5 signed up when I called last week so I didn't know if it was going ahead or not. They decided at the last minute that they would go ahead with it because they think more people will join once it's started. Yesterday was the first class. 3 got the flip for sure and the other 2 will probably get it after a few more tries at home.

I've done a review of all the designs posted in the Design-Tat blog. All of the participants have come up with wonderful designs. It's amazing at the diversity of designs all based on the same little piece.

With the first group I did a tutorial with screen shots showing how to use drawing software. This time the version of free software available has changed, so it meant re-writing chunks of the tutorial and taking all new pictures to match the new software. The first installment is done and posted now.

All of the designs are in the new book except that I need to juggle things around again because I've ended up with 2 blank half pages. I need some time with a clear head for that so I'll tackle it tomorrow.

After a really crappy summer weather wise, we've had a couple of nice days and today we took advantage of it and took the parrot out for another bike ride.She enjoys getting out and going for a ride. When I grab her leash she immediately puts her foot up so that I can strap it around her foot. The leash came with a metal clasp which I have replaced with a wide leather band. I know that parrots have ended up with broken legs from leashes, but I think that between the possibly of being scared and jumping into trouble like an oncoming car and being killed and the possibility of ending up with a broken leg, the broken leg might be preferable. She was wearing it when I was hit by the car in 2005 and both of us were thrown 20 feet down the road. I ended up with 5 breaks in my leg; she lost a tail feather. The leash does make it possible to take her with us on long bike rides down busy streets, which is more fun for her than being left alone at home.

Several of the update team have been posting to the 25 Motif Challenge blog, so it's caught up and I have the evening free to tat. I think I'm going to go put my feet up, grab a cup of tea and my tatting and see what's on TV. So with that, I'll leave you with another snippet of tatting from the new book.

Bikes, Cars and all that

I ride funny. Not in the sense of ha ha, he he, but in the sense of peculiar. For many years I rode an old bike. It wasn't a modern rugged mountain bike but a narrow wheel bike that we used to call a racing bike, but it's now called a street bike. The only padding on the seat was the leather covering so I often rode side saddle with one cheek on the bike to make use of my own ample padding. I rode in one gear and if I needed to change gears going up hill, I got off and walked.

That was partly because I was usually encumbered and partly because the gears slipped. Just as I was giving it my all to reach the apex of the hill the gear would slip nearly throwing me off the bike. Having nearly taken a header over the handlebars on more than one occasion, I just gave up on gear shifting and left it in the one gear where it would happily stay in place.

That was OK, it suited me. I'm not a speed demon, I'm not in a hurry to get anywhere, I'm riding the bike to get fresh air and take the bird for a ride. I DID say I was usually encumbered.

You don't do anything fast while riding with a macaw. At any moment something might startle her into spreading her 3 foot wingspan and totally obscuring your vision. Or she might decide that brake cables look like good snack food. Or she might just dig her claws in and yell in your ear. After years of riding with her I have learned that I have more control over her when she's on my forearm. Not only that, but I'm more likely to get home and still have clean clothes instead of a shirt with little birdie deposits on it.

Of course riding this way means that you can only change gears on one side of the bike anyway. So I have become accustomed to only gear shifting on the right. The old bike got demolished when I was hit by a car a few years ago and I was sans bike until I persuaded hubby that I was quite able to ride again. The new one is 18 speed. I'm not too sure what I'm supposed to do with the left gear shift never having had occasion to use it before, but the right ones have the familiar slipping problem. Well, not quite the same. These gears don't want to shift at all. After much struggling they go all the way one direction or the other, with nothing in between.

Lately, with the car in the garage, we have found it necessary to do most of our running around using the bikes. These trips were on busy roads and needed to be done as quickly as possible so Dusty has been left home. Long trips with both hands free have left me the luxury of trying different gears and with hubby constantly reminding me to change to low gear going uphill, I tried to comply, without a lot of success. The stinker is so stiff I can barely get it to move and my wrist is starting to give me constant pain from fighting with the gears. So the other day he took a look at my gear shift. Sure enough there was no way the derailleur could shift into high it just wouldn't go. After a few minutes of looking at it he realized it was missing a screw which he cannibalized off the old bike, but it still wasn't right.

He checked out a few videos on the internet and saw a really nifty stand that held the working bits of the bike at eye level so he built his own stand. He got my bike up on the stand and started adjusting the gears. Then the phone rang. It was the garage.

Initially they thought it was one of the fuel injectors which was going to run around $175. Ouch. We've had them changed before and knew we could get them for less. So we called around and got a price of $49. Much better, but it comes from a competitor's shop so we have to get the part first and they would install it. At least both shops are on the same street. This time they called to say it's not the injector, it's a faulty ignition module at $285. We've had them changed too and know we can get the parts for less. Considering the time of day we have to hurry by bike to get down to the parts store and back to the garage before closing.

So without making any adjustments to the gears we rode off to the garage. Three times this week we have gone the 7 km there and 7 km back all the while I'm fighting with the gear shift. My wrist started screaming at me every time I have to use the mouse from all the abuse it's taken trying to shift the gears. Rob's bike has Shimano gears properly installed and his move forward and back with almost no pressure at all. Conversely mine almost take 2 hands to shift. Last night he got the bike up on his newly made stand and adjusted the gears. They now move forward and back through the full range. They're still a little stiff, but much better than before.

This morning the garage called. The car's fixed.

In case you're curious, it wasn't the module after all, it was a burned out wire leading to it. So we took the module back for a full refund. We did replace the fuel injector, because if it's ready to go, better replace it now while the engine's already apart. And the PCV valve that Rob's had for years but couldn't face pulling the engine apart to put it in, and the gas filter he had, that's easier to reach with the car on a hoist. So in the end they did a good job and it didn't cost us anywhere near what we had anticipated and certainly a lot less than a new car.

Tatting? Did I hear someone ask about tatting? Who's had time for tatting.

In case you've been wondering where I've been....

I've spent a lot of time with hubby out in the garage recently. Not because I like the garage, but because we've been trying to get the car going. We made a quick trip out to the store to pick up a prescription for hubby and the car quit on us. In the left turn lane, at rush hour, at a busy intersection. We had to get out and push it around the corner and half way up the block before we could get it off the road. Thankfully a landscaper cutting the grass alongside the road helped us to get the car into the parking lot and out of the way.

Our car has served us very, very well. since we bought it in 1988. We checked the records and since 2001 we have paid $4298.00 in repairs or $537.25 average per year. That's above the regular gas, and oil change maintenance stuff that you'd pay on any car, but when you figure that the car is over 20 years old and it's been paid off for a long time, that's not too bad. What we've paid in repairs in a YEAR is less than one month's payment on a new car. This time however, we're not sure what's wrong with it and if it can be fixed. This time it may have well and truly, bit the bullet.

Buying a car doesn't seem to be in the budget. I suppose it might be, but I don't like the idea of going into debt just to be able to run to the store when I want. We've been looking at used cars and looking at what we can afford, but what you can buy with $0, isn't much.

Holding the light for hubby while he pokes and prods the vehicle has been interspersed with collecting up tatting bits for display to be used at the open house Friday. It was apparently a roaring success. All I know is that I tatted and gave away a lot of 4 ring butterflies, and talked to a lot of seniors about taking tatting classes in September. This is a paying gig, but it doesn't pay a lot. Which is a pity because getting paid to teach tatting is my cup of tea. They have set a minimum of 6 people for the class so if we get 6 or more I'm teaching and if they get fewer, I'm not. I'll let you know how it goes. They've set it up as a 12 week course, so if they stick with it for 12 weeks they will be truly hooked. Mwahaha...

In between these activities I have been trying to get some patterns into publishable format. The patterns are drawn and I'm down to the "pull it into the publication" stage. I had a set order in mind, but I've hit a point where I either have to change my order around or I have to create some new smaller designs as filler because I've hit a point where the designs are taking up three quarters of a page. That will mean I either have to leave large bare spaces or try cut drawings in half which I don't want to do. I have been struggling with this book for far too long, partly because I took out a chunk of time in the middle of it to make replacement pieces for some folks whose tatting got lost in the mail, and partly because I have overextended myself taking on things I shouldn't have. I already had a full plate of stuff that I had to do when I took on a bunch of stuff I wanted to do. Now I'm paying the piper in having to push back the publication date of my book. In the mean time the new design course is off to a good start. It never really occurred to me that I had much to teach about designing. I know I've learned from some earlier mistakes and there were a few things that I've figured out. When I started the first course I thought I might get 2 or 3 people that wanted a few pointers. When 60 people signed up I was flabbergasted. Seriously, I thought I might do 2 or 3 lesson with some pointers to get beginners started, but when I actually sat down and started to write out the lessons, there was quite a bit to go through, so I guess I did have something to teach after all.





The pictures shown? They're bits of the new designs of course.

Heavenly Blue

It's the colour of these morning glories. Typically they come in pink and purple, so I think the blue variety must be some kind of a hybrid. Every day the vine is covered with blooms that die by evening. Then the next morning you are greeted with a whole new set of flowers. They are blooming so profusely that you can just barely see my outdoor tatting spot. Earlier in the year the clematis forms a large column of purple against the wall. The backyard is shaded by tall buildings behind and a large tree overhead, so very little grows back there, but in the front yard I can be surrounded by flowers all summer long. I wonder if I can bring this pot inside and enjoy these flowers throughout the winter? Failing that, I will save the seeds and start another one for next year.